Big Dipper F-02 Manual
Hi Guys, I recently bought a oem f-02 (skytec 152.198). The manual says it has 10 channels, but the device reacts at 12 channels.
Stone sour full discography torrent download. The manual seems to describe another product, none of the dmx values seems to correspond. I have reconfigured a fixture file, and everything seems to work fine except a few things:.I can't figure out what function some channels have: 1: Shutter 2:????? 3: gobo 4: Strobe 5: Pan + dot scanning 6:?????
7: tilt + line scanning 8:????? 9: size 10: color, above 200 the device resets 11:???
Above 200 the device resets 12: color mode. When I use a gobo which can be modified by x-y- or size, the gobo jumps a bit up and down/ left or right. Also you can see the mirror 'jump'. When I use a gobo which can be modified by x-y- or size, color can be changed but often another color flashes trough.
When I use a gobo which cannot be modified by x-y- or size, i cannot change the color anymore, have to go back to a gobo that can be x-y-size adjusted, change color and then the not adjustable gobo stays in that color. I allready swapped the device at the dealer, but this new one has exactly the same problems. Does anyone have the same problems? Hope someone can help me. Hi Guys, Have some updates and a success story for a similar laser system: Last week i bought a Laserworld EL-200RGY (which seems to have same receiver hardware as Big Dipper F-02) and I had same problems as magic explained above in this thread with gaps in the DMX channel list resulting in having 12 channels instead of 10! And panning was not working at all. I was testing the Laser on an Enttec DMX-USB Pro and on Behringer's LC-2412.
Basically same problems, but gaps are on different channels. Some time ago I had already same problems with an Eurolight TS-5 scanner on the Enttec DMX-USB Pro, but it was working on the Behringer board. Some measurements on the DMX timings turned out, that Behringers LC2412 has much slower timing. Since both senders are working inside DMX specifications, the problem is DMX timing problems on cheap 'China-Products'.
BTW: I returned the Eurolight TS-5 due to those problems and I 'exchanged' it with the real stuff - a Martin SCX600 - which is doubling the light output with same hallogene wattage! Last night I found out how to configure the Enttec interface DMX timings. Set it to extremely slow timings, and voila - the laser is now working as expected - all channels ok and no gaps.
During the next days I will investigate to find ideal settings for fastest possible DMX packet repetition rate where those cheap receivers still work reliable. If required, I can give detailed info on how to configure the Enttec DMX-USB Pro. The Enttec Pro Utility is for the ENTTEC PRO device and NOT for the Enttec open!!!!!!!!!! Check what you have - open or pro! It will never work in a million billion years!!!!
Also Ive not read the other threads on hear so this maybe talking out of turn but I cant belive that a fixture would not want to talk to a usb device. The usb to dmx device is just that. The signal coming out of the device (who ever its made by) is DMX. If the device is talking to other fixtures without any problems then the device works and the non working fixture is broken. If this is the only fixture you have, then borrow / get another fixture to try. Try to establish what bit is really broken or indeed if your cable(s) are ok and wired correctly.
. BEAM LASER USER MANUAL Model:F01(RGY)、F02(RGY)、K800 Please read this manual carefully before operating the LASER display system. Www.bigdipper-laser.com Notices 1. Do not self disassemble or repair the system unless qualified in the relevant field of electronics. When there is a problem, please enquire or contact a qualified electrician, or with your local dealer. been installed. Before connecting or disconnecting the power, adjust the luminance of the LASER diode to avoid any damage to it.
F-02 In Sap
Before powering on the system, be sure the power cable is connected into the power socket. Turn off the system for 25 minutes after running continuously for three hours. Displaying more than 50 light beams and system should be 1.5 meters. At the same time, keep patterns, displaying laser patterns specified by international laser display association, such as Effect more than half a meter between the wall and LASER diffusing laser network.
Little Dipper And Big Dipper
1-160 Manual move is the following 161-190 Automatic loop (from left to right) Horizontal 191-220 Automatic loop (from right to left) The 1st code is off-sound control mode( host laser) move Automatic loop (from right to left and right 221-255 to left) The 1st code is on-AUTO play mode( host laser) 1-160.
Comments are closed.